Internal GPS-GLONASS-GNSS Active Patch Modules

Internal GPS-GLONASS-GNSS Active Patch Modules

The AGGP series of GPS – Glonass- GNSS active patch antennas (AGGP.25F and AGGP.35) are the best choice to use as embedded antennas with the latest generation of GPS-Glonass-GNSS receivers. They both feature advanced wide-band ceramic patch antennas with optimized gain, radiation pattern and axial ratio at GPS and Glonass centre frequencies.

They also include a two stage LNA and a front-end SAW filter to reduce out of band noise such as from nearby cellular transceiver, and improve probability of the wireless device passing radiated spurious emissions certification. Produced in TS16949 automotive quality approved facility and 100% tested for gain (S21), return loss (S11) to ensure total consistency of performance.

Cable type, length and connectors can be customized and samples offered according to requirement, subject to minimum order quantities in production. Taoglas also offers custom tuning service based on minimum order quantities, contact your local regional sales office for details.

How to purchase our Products: Please Contact Us for large volume or OEM enquiries or for local support view our list of distributors. You can also contact Taoglas if you have any queries about our products, would like to become a distributor, or require a Custom solution.

RoHS

Full line of Internal GPS-GLONASS-GNSS Active Patch Modules

  Model Description Datasheet
AGGP.25F.07.0060A

AGGP.25F.07.0060A

  • 2 Stage 28dB
  • Active GPS-Glonass-GNSS Patch Antenna Module
  • Front End SAW Filter
  • 60mm 1.13 IPEX MHFI (U.FL)
  • Input Voltage: 1.8V/3.0V/5.0V
  • 25.1mm*25.1mm*7.4mm
AGGP.25F.07.0060A Datasheet Download
AGGP.35F.07.0060A

AGGP.35F.07.0060A

  • 2 Stage 28dB
  • Active GPS-Glonass-GNSS Patch Antenna Module
  • Front End SAW Filter
  • 60mm 1.13 IPEX MHFI (U.FL)
  • Input Voltage: 1.8V/3.0V/5.0V
  • 35mm*35mm*6.9mm
AGGP.35F.07.0060A Datasheet Download