Internal GPS - Active Loop Module

Internal GPS - Active Loop Module

The active loop antenna ALA.01 is best suited for applications where omni-directionality is important. The average gain is similar to an 18mm active patch antenna but in a much narrower profile, only 2.3mm at its highest point, allowing this antenna to be used perpendicular to the device main-board, or placed adjacent to the top or bottom of device main board.

A one stage LNA combined with a Front-End SAW filter boosts the S/N (C/N) of the GPS system and helps to overcome some noise effects from today’s crowded device boards that passive antennas cannot resolve. The antenna can be placed in a plastic slot in the device housing. Alternatively adhesive foam, hot-melt, or non-conductive screws could be used to mount the antenna. The core antenna design principle of loop current flow tends to “lock-out” a lot of surface noise from close circuitry from entering the antenna.

How to purchase our Products: Please Contact Us for large volume or OEM enquiries or for local support view our list of distributors. You can also contact Taoglas if you have any queries about our products, would like to become a distributor, or require a Custom solution


Full line of Internal GPS - Active Loop Module

  Model Description Datasheet


  • 1575MHz Ceramic Active Loop Module
  • 16dB One Stage
  • 95mm Ø1.13 IPEX MHF(U.FL)
  • 45*10*2.3mm
ALA.01 Datasheet Download