Select language and region
English 日本語 한국어 繁體中文

WLP.25 25*25*4.5mm Ceramic 2.4GHz Wi-Fi/Bluetooth Patch Antenna

WLP.2450.25.4.A.02

4.5dBi Peak gain
Pin Type with adhesive for ease of mounting
Automotive TS16949 Production and Quality Approved
Dimensions: 25*25*4.5mm
RoHS & Reach Compliant

Image WLP.2450.25.4.A.02

WLP.2450.25.4.A.02

WLP.25 25*25*4.5mm Ceramic 2.4GHz Wi-Fi/Bluetooth Patch Antenna

Overview

WLP.25 25*25*4.5mm Ceramic 2.4GHz Wi-Fi/Bluetooth Patch Antenna

This WLP.25 patch antenna for ISM, Wi-Fi, Bluetooth and Zigbee is based on smart XtremeGain™ technology. It is mounted via pin and double-sided adhesive and has been selected as optimal solution for the 50*50mm ground plane. This passive patch offers typical gain response from 2.5 dBi and a higher gain can be achieved, depending on the Ground Plane, the space available and clearance afforded. The WLP.25’s high gain performance is a perfect solution for metering and remote monitoring applications; it can deliver longer range than smaller chip antennas.

Many module manufacturers specify peak gain limits for any antennas that are to be connected to that module. Those peak gain limits are based on free-space conditions. In practice, the peak gain of an antenna tested in free-space can degrade by at least 1 or 2dBi when put inside a device. So ideally you should go for a slightly higher peak gain antenna than mentioned on the module specification to compensate for this effect, giving you better performance.

Upon testing of any of our antennas with your device and a selection of appropriate layout, integration technique, or cable, Taoglas can make sure any of our antennas’ peak gain will be below the peak gain limits. Taoglas can then issue a specification and/or report for the selected antenna in your device that will clearly show it complying with the peak gain limits, so you can be assured you are meeting regulatory requirements for that module.

For example, a module manufacturer may state that the antenna must have less than 2dBi peak gain, but you don’t need to select an embedded antenna that has a peak gain of less than 2dBi in free-space. This will give you a less optimized solution. It is better to go for a slightly higher free-space peak gain of 3dBi or more if available. Once that antenna gets integrated into your device, performance will degrade below this 2dBi peak gain due to the effects of GND plane, surrounding components, and device housing. If you want to be absolutely sure, contact Taoglas and we will test. Choosing a Taoglas antenna with a higher peak gain than what is specified by the module manufacturer and enlisting our help will ensure you are getting the best performance possible without exceeding the peak gain limits.

This antenna can be tuned for a custom device environment, subject to NRE and MOQ. For further information please contact your regional Taoglas customer support team.

Technical Specification
Name Value
RoHS Yes
Antenna Type Embedded Antennas, Wi-Fi/Bluetooth
Mechanical Style Patch
Gain (Max) 4.5
Impedance 50
Minimum Operating Temperature -40°C
Maximum Operating Temperature 85°C
Mounting Style Pin/adhesive
Termination Style Pin
Connector Body Style Straight
Polarity Linear
Frequency Range 2400-2500MHz
Connector Polarity Normal
Cable Length (mm) n/a
Packaging PE Bag, Carton
VSWR 0
Wi-Fi Bands 2.4GHz
Length (mm) 25
Width (mm) 25
Height (mm) 4.5
Weight (g) 12.2

By default, we will search the Taoglas Product Catologue which includes in excess of 900 products.

However, if you wish to find non-product content such as a Support Document or Press Release, choose Search Website.

Search Results