AGGBP.SLS.18A – GPS/GLONASS/Galileo/BeiDou 18mm Active Patch with SAW/LNA/SAW, I-PEX MHF® I (U.FL)

AGGBP.SLS.18A.07.0060A

Full GPS-GLONASS-GALILEO-BeiDou Coverage
13.0 dB One-Stage LNA
Ceramic Patch Element
Front-End and Back-End SAW Filters to Reduce Out of Band Interference
Wide Input voltage +1.8V to +5V
60mm ø1.13 I-PEX MHF® I (U.FL comp)
RoHS & REACH Compliant

Image AGGBP.SLS.18A.07.0060A

AGGBP.SLS.18A.07.0060A

AGGBP.SLS.18A – GPS/GLONASS/Galileo/BeiDou 18mm Active Patch with SAW/LNA/SAW, I-PEX MHF® I (U.FL)

Datasheet
Overview
GPS/GLONASS/Galileo/BeiDou 18mm Active Patch with SAW/LNA/SAW

The Taoglas AGGBP.SLS.18A.07.0060A is an internal GPS/GLONASS/GALILEO/BeiDou active patch antenna with 13.0 dB LNA gain and excellent out-of-band rejection. These characteristics make the AGGBP.SLS.18A ideal for applications where the antenna will be placed near transmitters, such as cellular, Wi-Fi, Bluetooth, etc. within your enclosure.

Typical Applications Include:
  • Wearables
  • Connected Health
  • Transportation

The front-end and back-end SAW filters feature excellent rejection across all non-GNSS frequencies to prevent overdriving or damaging your GPS receiver from nearby transmitters. At the commonly used LTE frequencies between 700MHz-850MHz, the AGGBP.SLS.18A features greater than 60 dB of rejection. Between 1700MHz-1910MHz, the AGGBP.SLS.18A features greater than 45 dB of rejection.

Even with the excellent out of band rejection, the AGGBP.SLS.18A maintains a very low noise figure of 2.0 dB at 1575.42MHz. This low noise figure minimizes the overall signal degradation typically caused by losses in transmission lines.

Image AGGBP.SLS.18A.07.0060A

AGGBP.SLS.18A.07.0060A

AGGBP.SLS.18A – GPS/GLONASS/Galileo/BeiDou 18mm Active Patch with SAW/LNA/SAW, I-PEX MHF® I (U.FL)