Full GPS-GLONASS-GALILEO-BeiDou Coverage
13.0 dB One-Stage LNA
Ceramic Patch Element
Front-End and Back-End SAW Filters to Reduce Out of Band Interference
Wide Input voltage +1.8V to +5V
60mm ø1.13 I-PEX MHF® I (U.FL comp)
RoHS & REACH Compliant
GPS/GLONASS/Galileo/BeiDou 35mm Active Patch SAW/LNA/SAW
The Taoglas AGGBP.SLS.35A.07.0060A is an internal GPS/GLONASS/Galileo/BeiDou 35mm Active Patch SAW/LNA/SAW antenna with 13.0 dB LNA gain and excellent out-of-band rejection. These characteristics make the AGGBP.SLS.35A ideal for applications where the antenna will be placed near transmitters, such as cellular, Wi-Fi®, Bluetooth®, etc. within your enclosure.
Typical Applications Include:
- Asset Tracking
- Navigation
- Transportation
The front-end and back-end SAW filters feature very good rejection across all non-GNSS frequencies to prevent overdriving or damaging your GPS receiver from nearby transmitters. At the commonly used LTE frequencies between 700MHz-850MHz, the AGGBP.SLS.35A features greater than 60 dB of rejection. Between 1700MHz-1910MHz, the AGGBP.SLS.35A features greater than 45 dB of rejection.
Even with the excellent out of band rejection, the AGGBP.SLS.35A maintains a very low noise figure of 2.0 dB at 1575.42MHz. This low noise figure minimizes the overall signal degradation typically caused by losses in transmission lines.
Name | Value |
---|---|
Technology | Embedded Antennas, GNSS |
GNSS Type | Active GNSS |
GNSS Bands | L1 |
Mechanical Style | Patch |
Impedance | 50 |
Minimum Operating Temperature (℃) | -40 |
Maximum Operating Temperature (℃) | 85 |
Mounting Style | Pin/Adhesive |
Termination Style | Connector |
Antenna Connector Type | I-PEX MHF® I (U.FL) |
Length (mm) | 35 |
Width (mm) | 35 |
Height (mm) | 8.1 |
Cable Type | 1.13 Coax |
Connector Body Style | Straight |
Polarity | RHCP |
Frequency Range | 1559MHz - 1610MHz |
Connector Polarity | Normal |
Cable Length (mm) | 60 |
VSWR | 2:1 |
Weight (g) | 21 |
RoHS | Yes |
Gain (Max) | 13.8 |