Select language and region
English 日本語 한국어 繁體中文

AGPSF.36C.07.0100C Active GPS L1/L2 Low Profile Stacked Patch Antenna, I-PEX MHF® I


Taoglas Sure Technology
Embedded Active GPS L1/L2 Stacked Patch Antenna
GPS L1 / L2 Band Operation
Low Noise Figure
Excellent Out-Of-Band Rejection
Low Axial Ratio
2 Stage LNA and SAW filter
Cable : 100mm 1.37 Coaxial Cable
Connector: I-PEX MHF® I
Dimensions: 35*35*11.1mm

Image AGPSF.36C.07.0100C


AGPSF.36C.07.0100C Active GPS L1/L2 Low Profile Stacked Patch Antenna, I-PEX MHF® I

Embedded Active GPS L1/L2 Stacked Patch Antenna

The Taoglas AGPSF.36C, with Taoglas Sure Technology, is an embedded active GPS L1/L2 stacked patch antenna, supporting both L1 and L2 bands. It is a high performance, economical solution for the highest accuracy centimeter-level tracking applications.

Typical applications include:
  • UAVs and Robotics
  • Transportation
  • Autonomous Vehicles
  • Marine
  • Agriculture
  • Navigation
  • RTK

This compact antenna exhibits excellent radiation patterns on both L1 and L2 bands and with a low noise figure to preserve signal quality helps minimize time to first fix. It also features excellent out-of-band rejection to prevent out-of-band signals from overdriving or damaging its LNAs.

The AGPSF.36C features very tight Phase Centre Offset (PSO) at just ±2cm at the L1 Band and ±5cm at the L2. The precision of antenna phase center directly affects the accuracy of GNSS positioning systems and can ensure that the accuracy of the receiver really is cm level. See section 3.1.2 for more information and results.

This antenna has been tuned and tested on a 70 X 70 mm ground plane, working at GPS L1, 1575.42 MHz and L2, 1227.6MHz, with a 2 stage LNA ensuring good signal strength. It can operate with an input voltage ranging from 1.8 to 5 volts.

Cables and connectors are customizable. Patch antennas can also be tuned to customer-specific device environments, subject to NRE and MOQ. Contact your regional Taoglas sales office to request these services or additional support to integrate and test this antenna’s performance in your device.

Technical Specification
Name Value
RoHS Yes
Antenna Type Embedded Antennas, GNSS
Mechanical Style Patch
Gain (Max) 21
Impedance 50
Minimum Operating Temperature -40°C
Maximum Operating Temperature 85°C
Mounting Style Pin/adhesive
Termination Style Connector
Antenna Connector Type I-PEX MHFI (U.FL)
Cable Type 1.37 Coax
Connector Body Style Straight
Polarity RHCP
Frequency Range 1227MHz - 1575MHz
Connector Polarity Normal
Cable Length (mm) 100
Packaging Carton
GNSS Type Active GNSS
GNSS Bands L1/L2
Length (mm) 35
Width (mm) 35
Height (mm) 11.1
Weight (g) 32

By default, we will search the Taoglas Product Catologue which includes in excess of 900 products.

However, if you wish to find non-product content such as a Support Document or Press Release, choose Search Website.

Search Results